Upgrade Your Contact Points

- Endurexx/PowerMesh - Moisture management and quick-drying - Light silicone inside straps and good waist support - 2 wide pockets at tighs and 1 at back - Inside silicone power band - Anti-Chafing stitching - Front and back reflective accents - Inseam: 10.25"/ 26cm

Naughtvind Bibs balance warmth and breathability for unmatched comfort on cold-weather rides. We use fabric that’s water-, wind-, and abrasion-resistant on the outside and fleece-lined on the inside to keep the elements out and your body heat in. Pockets and reflective accents offer extra functionality and safety. The chamois-less design lets you pair Naughtvind Bibs with your favorite cycling shorts. We designed these winter cycling bibs to layer under our Naughtvind Pants for truly frigid days on the bike. - Chamois-less design for pairing with your favorite chamois shorts - Thermal fleece lining to retain body heat - Breathable mesh back for ventilation - 4/5 length fits with winter boots without bunching - Reflective accents for safety - Pocket storage for ride essentials - Made with sustainable materials

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use -The Aerolite sole is designed to maximize aerodynamics and power transmission -The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort -The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike

The Sidi MTB Speed 2 is a fast, efficient and durable shoe tested for the most difficult off road terrain. The ease of adjustment and clean design make it reliable and intuitive to use. -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB Competition Sole has been specifically designed for mountain biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped to reduce heel slip and increase power transfer

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about. - Long, tapered nose and flatter platform provide ample real estate for shifting positions - Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road - Carbon rails, 7mm x 9mm

The PN 1.0 is ready to take on any road. With the same chassis as the beloved Attack saddle, the PN 1.0 has a sleek updated look to match any bike. While originally slated as a road bike saddle, it has proven to be equally loved by triathletes and time trialists. Like the other PN saddles, the PN 1.0 is 110mm wide, offering superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key Features: - Narrow design for maximum thigh clearance - Enables total freedom-of-movement for the rider Commonly Used For: - Road bikes - Triathlon bikes - Time Trial bikes - Tech Specs: Category: Performance Narrow - Length: 275mm - Width: 110mm - Padding: 25-Series Foam and Gel - Rails: CrN/Ti Alloy or Proprietary Stainless Steel Alloy - Colors: Black, White - Available as part of the ISM Demo Program

Push your limits in the great outdoors. These women's Five Ten biking shoes feature the BOA® Fit System for a custom fit. Seamless overlays offer abrasion resistance through rough terrain. The clipless shank is compatible with all mountain bikes. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box

These men's Five Ten clipless bike shoes are built for intense pedaling. The BOA® Fit System offers on-the-fly adjustments. A Stealth Marathon rubber outsole balances grip and durability. The impact-resistant toe box adds protection. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box

This is one of our best sellers across all Collections. It was designed by Louis Garneau himself after suffering a lot during the 1984 Los Angeles Olympics because he couldn’t find any technical shoes on the market at the time. And we’ve continued to improve it year after year since then. With a perfect racer fit, the carbon sole maximizes the energy transfer on the pedal and the sleek lines fit the foot perfectly while the perforated inner sole keeps you cool. We’ve thought of everything! Read the technical sheet, you’ll be impressed too. Technical Details: - Technology: RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture-wicking, breathable, and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

To give a break to the 26 bones that squash and squeeze in your foot while you’re riding, we have patented a unique X-Comfort Zone. It’s a small section inside the shoe that can expand up to 5 millimeters to prevent numbness. Without any extension system, the toes end up on top of each other and get numb. Thanks to this innovation, you won’t have to end your ride before you’re done ever again. For great performance, we’ve used a carbon composite sole that optimizes energy transfer on the pedal. We wish you an excellent season! - Technology : RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture wicking, breathable and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

New for 2018, ISM proudly introduces the PN 3.1. Starting from our PN 3.0 chassis, we added more padding for riders who prefer a slightly softer ride. With a 120mm rear end and and tapered edges, the PN 3.1 is so comfortable, it will “disappear” underneath you. Similar to the other PN saddles, the PN 3.1 offerings superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 3.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - All-new saddle shape - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 255mm - Width: 120mm - Padding: 40-Series Foam - Rails: Chromoly - Colors: Black, white

The PS 2.0 is the updated version of the popular ISM "Road" saddle. It features 30-series foam and gel padding, and is ideal for triathlon, time trial, and road bikes. Similar to the other PS series saddles, the PS2.0 features a slight upward slope at the rear—providing superb hip support when your body is rotated forward in the aero position, or an aggressive road riding position. This tends to be preferred by athletes that don’t move around on the seat excessively while riding. They are a top choice for triathletes and time trialists who ride in the aerobars, or for flat courses in which the athlete likes to 'settle in' to one position and go. Like all ISM saddles, the PS2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear section provides maximum hip support - Rear transition hook Commonly used for: - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Short - Length: 245mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

TEMPO ARGO R1 is a versatile endurance road saddle with a short-nose design and generous ischial support that encourages stability. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Tempo Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the endurance riding option, Tempo Argo has been engineered to deliver a riding feel that suits the balanced geometry of today's all-purpose road machines. The padding is made from fizik's proprietary Type 2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R1: a combination of a ride-compliant carbon-reinforced nylon shell and a highly stiff carbon rail - Wingflex: the shell's side edges flex and adapt to the rider's inner leg movement - Type 2 foam: progressive cushioning, with lower compression modulus SPECIFICATIONS: TEMPO ARGO R1 150 - Length: 260mm - Width: 150mm - Weight: 195g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm SPECIFICATIONS: TEMPO ARGO R1 160 - Length: 260mm - Width: 160mm - Weight: 202g - Height at 75mm width: 43mm - Length from nose to 75mm width: 103mm - Rail: 10 x 7mm

The PL 1.0 is the perfect saddle for your high performance bike. A fresh take on our Breakaway saddle, the PL 1.0 fits into the Performance Long category. It features bold new graphics, and all of the comfort you expect from ISM. All of the PL saddles are a full 275mm long, and allow for superb fore-aft rider movement. The rear measures 135mm wide – adding support for those that like to roll their hips back while climbing. Like all ISM saddles, the PL 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Long shape allows for fore-aft movement - Wider rear section than our Performance Narrow line Commonly used for: - Road bikes - Mountain bikes Tech specs: - Category: Performance Long - Length: 275mm - Width: 135mm - Padding: 30-Series Foam and Gel - Rails: CrN/Ti Alloy or Proprietary Stainless Steel Alloy - Colors: Black, white

With strategically placed mesh pockets on the thighs and lower back for seamless storage, your essentials are always at hand with the Prime SWAT Bib Shorts. The plush elastic suspenders and brushed tricot suspender anchor provide a secure, irritation-free fit, allowing you to focus entirely on the ride. All of our SWAT pieces are the most innovative storage solutions that keep exactly what you need exactly where you want it—which is why you can fit your phone, a tube, and plenty of gummy bears in your Prime SWAT Liner Bib Shorts. These Bib Shorts also feature an elasticated cuff with a silicone gripper, ensuring a gentle yet secure hold on your legs. This thoughtful design prevents ride-up, guaranteeing a distraction-free ride every time. The fully-sewn waistband construction combines durability with unrestricted movement, empowering you to conquer any road with ease. With our advanced Triple Density Body Geometry Contour 3D Chamois, these bib shorts offer unparalleled cushioning and support during long rides. - Mesh pockets on the thighs and lower back provide ample storage for long rides. - Stretchy elastic suspenders are plush and soft against the skin. - Brushed tricot suspender anchor holds the straps in place. - Fully-sewn waistband construction is durable and unrestrictive. - Elasticated cuff with silicone gripper provides a gentle, secure hold on the legs. - Mid-compression fit is supportive, yet unrestrictive. - Women's specific triple Density Body Geometry Contour 3D Chamois. - Fabric Content: MAIN: 46% Polyamide, 38%Polyester, 16% Elastane, OTHER: 73% Nylon, 27% Spandex, DETAIL: 100% Polyester Tricot

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

The Sidi Prima is designed for the modern rider. The Prima is easy to wear and adjust, thanks to its Firmor Closure and lightweight upper built to reduce foot fatigue. Its low-profile carbon nylon Aerolite Sole is engineered for efficient power transfer for sprinting, with enough flex and comfort for long rides. -The Single Tecno-3 System creates a perfect balance between the shoe's internal and external side, providing an excellent fit while adapting to every instep -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged strenuous use -Aerolite sole is designed to maximize aerodynamics and power transmission on the bike -The nylon and carbon fiber composite material of the Aerolite Sole provides the perfect balance of stiffness and flex for effortless and comfortable pedaling -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

The PM 2.0 an update of our Peak saddle. PM saddles incorporate a rounded and sloped rear end, allowing the rider to move up-and-over the back of the seat on technical trails. The PM 2.0 also excels at long-distance events, such as 24-hour racing. With long hours in the saddle, nobody wants to go numb – and this is your perfect weapon. Like all ISM saddles, the PM 2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear for clearance on technical trails - Same basic design as the popular Performance Short models Commonly used for: - Mountain bikes Tech specs: - Category: Performance Mountain - Length: 260mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly - Color: Black

We designed the Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit SPECS: FEATURES: - Double-weave fabric provides the best combination of weather protection, breathability, and stretch - Black reflective material placed in key areas enhances your nighttime visibility - Minimal and secure webbing waist adjustment - Zipper and snap ankle closure fits over 45NRTH boots without creating excess bulk - Imported POCKETS: - Front pockets and zippered rear pockets with side access VENTILATION: - Zippered ventilation at the thighs and lower leg - SUGGESTED TEMP RANGE - 0°F (-18°C) to 25°F (-4°C) Comfort MATERIALS: - 88% Recycled Nylon, 12% Elastane - Exclusive of trims

We designed the Women’s Naughtvind Pants to protect you from winter’s harshest elements. Using our own experiences riding through Minnesota winters, we built these pants with a stretchy, breathable, wind- and water-resistant material. Fleece-lined thighs keep body heat in, while vents let you regulate temperature. Features such as reflective accents and an adjustable waist suit many types of riding and riders. Beat the cold with these winter cycling pants. - Bike-focused design with high rear waist and articulated knees for riding comfort - Made with recycled materials - Water- and wind-resistant shell material stretches as you move - Fleece-lined thigh offers protection from extreme wind and cold - Two ventilation areas for dumping excess heat - Adjustable waist for dialing in fit - Fits over bibs for easy layering - Reflective accents for safety - Adjustable ankle for boot-compatible fit - Available in Women’s (fitted) and Men’s (straighter) cuts

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Lightweight and packable wet weather pant with cycling-specific cut, "guaranteed to keep you dry." Wind and rain protection yet breathable to keep you dry on the inside, even when pedaling hard. For those who want to ride, whatever the weather. - 2.5 layers: less material, less weight - Active fit - Back zip pocket doubles as a stow-away pocket - Contemporary look - Drawcord at waistband to adjust fit - GORE-TEX PACLITE Plus Product: extremely breathable, ultralight and packable while durably waterproof, windproof and robust - Adjustable leg width with velcro fastening for chain protection - Pre-shaped knees - Reflective details - Wear-resistant seat reinforcement - SHELL 1 FACE 100% Polyester; SHELL 2 FACE 100% Polyamide

For windy or cold days, these GORE WINDSTOPPER tights will keep you warm and protected. Keeping the wind off during your commute or training ride will keep you happier and performing better, no matter how long or short your ride is. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - GORE WINDSTOPPER Cup Technology: highly breathable, preformed windproof front for optimum comfort - Adjustable bibs - Zipper with semi-lock slider and reflective piping on lateral hem - Flat-lock seams - Elastic braces - Zip-underflap - Pre-shaped knees - Reflective logo and print

Full weather protection for rainy trail days. Throw them into your pack and you'll never be caught out again. - Adjustable grippy waistband with flat cord - Adjustable lower leg width - GORE-TEX PACLITE Plus Product: extremely breathable, ultralight and packable while durably waterproof, windproof and robust - Zippered waterproof side pocket - Zippers at bottom of leg for easy on-and-off - Pre-shaped knees - Reflective details

The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g

The perfect apparel for the perfect ride, that's what our Prime Series apparel is all about. The best fabrics, constructions, and technologies go into these pieces, and the Men's Prime Bib Shorts are no exception. Starting with the uppers, the open suspender design keeps the bibs right where you want them, without constricting any upper body movements. The suspender fabric is also extremely soft and plush, eliminating any shoulder discomfort or irritation, yet we've still built in a HookUp magnetic bib connection making nature breaks much easier. The pre-molded, triple-density foam Body Geometry Contour 3D Chamois is contoured to perfectly match the curvature of your body, all while being soft and supportive in all the right places. With the Prime Bib Shorts, you're sure to embrace the "chamois time is training time" motto as they're so comfortable, you won't want to take them off. - Open suspender construction keeps the bibs in place without constricting the upper body. - Stretchy elastic suspenders are extremely plush and soft against the skin. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs to ensure a shift-free fit. - Fabric Content: MAIN: Knit 46% Polyamide, 38% Polyester, 16% Elastane - UPPER: 90% Polyester, 10% Elastane