Hubs

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28

- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g

- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)

Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

End caps for front conversion hubs.

At the Center of It All Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design. Power To The Pedal Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. Overbuilt But Not Overkill With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

- Press fit designed to work the hub's non-drive side collar.

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards. Features: - 7075-T6 aluminum hub shell - 6903RS sealed cartridge ball bearings - Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life - 17mm 7075-T6 aluminum axle with steel helicoil thread inserts - 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot - Weight: 11.2oz - Replaceable plastic hub guards included

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.

- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body

- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings