Shop All Gear

Craft's Siberian Gloves let you enjoy the outdoors even when temperatures dip to near-arctic levels. The wind-resistant fabric, neoprene wrists, and Velcro closures block gusts and keep you warm. Plus, silicone dots on the palms improve grip while reflective accents enhance your visibility. - Reinforced, extra gripping palm - Neoprene wrist with Velcro closure - Terry thumb - Windproof and weatherproof - Reflective logo

Introducing the new Destination Bike Rack, our lightweight bike hitch rack for 1-1/4" and 2" hitch sizes. This lightweight hitch bike rack securely carries 2 bikes and is easy to install and easy to use. Weighing only 20 pounds this rack also has a lot of great features. It's designed with individual wheel trays to make loading and unloading super breezy and includes padded frame holders to protect your bike even on the roughest roads. It also includes ratchet straps which slide vertically along the center post and rotate 360 degrees to accommodate every shape and size bike frame. The locking threaded hitch pin keeps the lightweight hitch bike rack from swaying during transit and the rack also folds up when not in use for safer driving and convenience. Fits 1-1/4" and 2" hitches.

The updated 2021 version of the Sport Rider for Electric Bikes is our hitch bike rack designed specifically to carry electric bikes with any sized tire up to 5" wide. This bike rack can carry up to 2 electric bikes or standard bikes. It includes new universal extra heavy duty wheel holders for heavy load carrying capacity. As with the Sport Rider SE, this hitch mounted bike rack can fold flat against the car when not in use and can be tilted for easy access to the cargo area. Also includes keyed alike locking hitch pin, 8' security cable, and locking frame to keep your rack and bikes secure during travel. Features patented No Wobble-No Tools Hitch Tightening System. For 2" hitches only.

11 oz Stainless Steel Tumbler   

Double wall 18/8 stainless steel thermal tumbler, with copper vacuum insulation, comes boxed and includes a threaded clear acrylic lid (tumbler use), and threaded gasket for holding can or bottle (koozie use). 

• Height 5.125” 
• Width 3.625”     
• hot 8 hours    
• cold 16 hours 
• Handwash recommended  
• Do not microwave

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.

The Purist Fixy Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design, even when the valve is open. - No push or pull is required to open and close the Heart Valve™. - Easy-to-clean mouthpiece - Ergonomic design of cap body provides easy grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Precision brake bleeding tools and adaptor kits for Magura brake systems.

Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders

- Heat treated - Individual hex keys

Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm

- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver

For dust cap removal on Origin8 XLT integrated cranks

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together

- Microcell is ergonomically contoured for maximum comfort and surface area

- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included

Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

To adjust preload on Hollowtech II cranksets

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

• 5/6mm hex wrenches

- Heat treated - Individual hex key

High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking

• Composite construction • Fits standard bottles

Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors

• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.