Wheels

Replacement clear plastic spoke guard.

Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

• Rim strips for 20-inch fat bike rims • 80mm wide

- Fits all freewheel hubs - Will not fit Cassette hubs - Type: STD Plastic - Color: Clear

• Locking skewer set • Cro-Mo • 70g (set)

• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

- Steel end nut for QR skewers

- Converts Schrader rims to Presta - Rubber - Sold individually

Replacement Axle nuts for three speed Sturmey Archer hubs.

- Eady to install - Spoke mounted - 2 per set

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip

Rampage Pro front wheel features a low flange aluminum hub shell with precision sealed bearings, female axle and 3/8" chromoly bolts. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Low flange aluminum hub shell with Heat-treated chromoly female axle (3/8") - CNC alloy cones and Sealed, 6000 bearings - Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H

The Rampage Pro rear wheel features an aluminum hub shell with precision sealed bearings, 9 tooth driver and 14mm heat-treated chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Aluminum hub shell with Heat-treated chromoly axle - CNC alloy cones and Sealed bearings - 1-piece chromoly (9T) driver -Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H - Two Thermalite Drive and Non-drive Hub Guards Included - Cassette style hub and Clutch-style freecoaster hub options - Left-hand and Right-hand drive configurations

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings - 9t Chromoly driver w/ 3-pawl system

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- Kits include one pair of end caps - Instructions and hub axle determinations are available online @ www.notubes.com

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed