Parts & Accessories

RaceFace Crank Arm Fixing Bolts - M15

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells.

• BOTTOM BRACKET SPINDLE SPACER BB30 - DRIVE SIDE 13
• SRAM Model ID: BB-SPP-A0

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

eeWings All Road Spindle Spacer - 1mm from Cane Creek.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

RaceFace CINCH Crank Bolt and Puller Cap Sets

SRAM Bearing Adjuster

• BOTTOM BRACKET BEARING ADJUSTER BB30 PRESSFIT 30
• SRAM Model ID: BB-SPP-A0

Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.

Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

Eagle E-MTB Chainring Bolt Kit

• Crank chainring bolt kit 4-arm Steel/Steel black including set bolt and nuts Eagle MTB
• SRAM Model ID: CR-SPP-A0

SRAM Crank Arm Fixing Bolts

• Crank Arm Bolt Kit Self-Extracting M15/M30 Dub Steel - Black (Eagle 70)

Steel Crank Bolts

• Chain Ring Bolt Kit 5-arm Double
• SRAM Model ID: CR-SPP-A0

RaceFace CINCH Crank Bolt and Puller Cap Sets.

CINCH Crank Bolt with Washer

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.



Compatible with:



- Race Face

- Turbine Cinch

- Atlas Cinch

- Atlas (24mm Spindle)

- Turbine (24mm Spindle)

- Aeffect Cinch (175mm length ONLY)

- Most other popular alloy MTB cranks (except some alloy DH cranksets)

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4) - Material: Steel - Type: 1x

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

- Reinforced nylon composite bashguards are replaceable and improves deflection while reducing hang-up during rock strikes
- Includes bashguards for one pair of pedals
- Size specific

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.

SRAM Crank Arm Fixing Bolts

• Crank arm bolt kit M18/M30 Alloy self-extracting BB30 Left (Black Red, Force) Qty 1
• SRAM Model ID: FC-SPP-A0

SRAM Crank Arm Fixing Bolts

• Pedal Assist Bosch Carbon Crank Cap
• SRAM Model ID: FC-SPP-A0