Chainrings

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design

The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super strong design. - Bore: 15/16" / 24mm - Thickness: 6.0mm - Adapters for 22mm & 19mm spindles included - Weight: 2.3-ounce

absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - The chainring's offset helps to create an ideal chainline - Provides exceptional reliability, weight savings, and stiffness - 9, 10, 11, and 12-speed Eagle compatible - Use with absoluteBLACK short chainring bolts

absoluteBLACK Oval 76 BCD Chainrings greatly improve traction and climbing abilities. They are designed for Rotor REX cranksets with their original 1x spider. Lighter and stiffer than original chainrings, these provide a super-smooth pedaling sensation. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Rotor Rex cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio

absoluteBLACK Oval 94 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for SRAM X01, X1, GX, NX, and GX Eagle cranks. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - For 48mm chainline - Rings have built-in threads for ease of mounting and reduction in weight - Chainring bolts are included

This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain

- CNC machined 7075/T6 aluminum with thick and thin tooth design for maximum chain engagement - Long tooth profile enhances chain retention

"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD

Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)

Dimension Chainrings. - No ramps, pins, or shift aids

Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy - 4 bolt

Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear. - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring

Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

- Boost/Fat direct mount chainrings - Narrow/Wide tooth design for chain retention on 1x systems - 10, 11, or 12 speed compatible - Forged and hard anodized AL6061-T6 alloy construction - SRAM 3-bolt interface for crank arm mounting - BCD: Direct Mount - Type: 1x - Material: AL6061 - Chain Compatibility: 10/11/12s - Offset: 3mm

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.