Filter By:
- Show More Sizes
- Show Fewer Sizes
BMX
$29.99
- 4140 Chromoly
- 3 Possible peg positions for longer peg life
- 14mm with 3/8-inch adapters included
- 4 inches (length) x 1-3/8 inches (outer diameter)
- Sold in pairs
- 8.75 oz (17.5 oz for a pair)
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
$13.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.
$11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance.
- 160mm lenght
- Par Ends Included
$14.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
$8.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic.
- Sold singly
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$22.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$44.99
Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts.
- No bearings, adjustable bushing tension
- Two-piece plastic bodies with replaceable metal pins and CroMoly spindles
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths.
- 7075 Aluminum
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$19.99
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
$27.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Includes M2 dual cable, double cable coupler and single cable coupler
- Replaceable hardware to eliminate stripping
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$29.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs.
SPECS
- Forged from 7075-T6 aluminum for greater strength and durability
- Steel insert prevents guard deformation, prolonging bearing life
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$19.99
The Springfield lever features an easy to install and remove design.
- Easy to install and remove without having to wrestle grips on and off
- Die-cast clamp design
$17.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
$25.99
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install.
SPECS
- 25.4mm diameter
- 6061-T6 Aluminium, CNC machined
Page 1 of 1