Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$2.50
Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm
$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$6.99
•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$11.99
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
$12.99
A simple plastic fender that can be used on either the front or rear of the bike with styling to match your ride. - Available in multiple colors - Made in the USA
$12.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany
$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$14.59
Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
$16.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
$16.99
Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included
$16.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
$17.99
Sunlite's Seatpost Clamper fender simply clips on to your seatpost and provides you with good coverage for those sloppy rides. It'll fit almost any seatpost.
$19.99
Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces
$19.99
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$19.99
Sunlite's Clip-On Fender Set fits 26-inch mountain bikes, so whether you ride sloppy trails or commute in any weather, you're covered. They're made from corrosion-proof plastic so they're light and tough, too.
$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
$20.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
$21.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included
$21.99
- Suitable for tire widths between 32mm and 55mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Front - Fender Size: 170mm x 90mm - Wheel Size: Universal - Material: Polypropylene - Weight: 21g
$21.99
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
$22.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$23.99
- Suitable for tire widths between 23mm and 35mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 540mm x 65mm - Wheel Size: Universal - Material: Polypropylene - Weight: 50g
$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$24.99
Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces
$24.99 - $27.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$24.99
You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.
$24.99
You only need a couple of seconds to protect yourself and your bike from wet weather. The Clip-On Fenders are made of a durable all-weather polymer so never again will you arrive at work with a rain streak up your back again. And because they're clip-ons, you can easily remove the fenders on sunny days.
$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
$24.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
$24.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$24.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$26.99 - $34.99
MTB+ and Fat Bike compatible - Fits up to 4" tires - 100% recyclable Polypropylene construction - Lightweight, durable, and easy to install/remove
$26.99 - $34.99
Lightweight, removable fender intended for MTB use - Adjustable rubber straps make installation quick and easy - 100 percent recyclable polypropylene
$26.99
Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.
$26.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
$29.95
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
$29.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams
$29.99 $60.00 50% Off
Fear the rain no more, have fun and stay dry with Specialized's Plug and Play Fender Set!
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.
Page 1 of 2 Next page